Electric valve

SLXXXA Series Electric Valve

Abstract:

The SLXXXA series switch type electric valve applied to control the central air-conditioning system, heating system pipeline
opening or closing, achieves the goal of the control indoor temperature.The control valve actuates by the one-way magnetic synchronous motor, the spring reposition. When the valve does not work,it is in a normally closed condition; when needs to work, by the temperature controller provide the valve signal, cause the electric valve to work through connecting AC power. Open the valve, chilled water or hot water into the air blower serpentined, provide the air-conditioning or warm air for the room. When the room temperature achieved temperature controller setting value, the controller make electric valve power failure, the recoil check spring to cause the valve closure, thus cutting off the water flow into the air blower serpentined. Through the valve to close and open, make the room temperature to maintain in the setting hypothesis temperature range of the temperature controller.

The series of electric valve driver and valve select the card sets joint method, may after the valve installment, then install the driver,on-site assembly, easy wiring. The driver plane design may close to the wall surface installment, takes the space to be small. Product reliable durable,the work noise is low, and can reliable work under the high temperature environment which in the hiding -like air blower serpentined installment.
Technical parameters:
Working mediumCold /hot water
Fluid temperature0-90non-condensing
Ambient temperature0-50
Bearing pressure1.6Mpa
Electric appliance specifications220V (10%) 50-60Hz
Screw jointG1/2G3/4G1
Closure differential pressure0.20Mpa0.10Mpa0.15Mpa